Upc/Ean - Intermec Janus 2020 User Manual

UPC/EAN

Purpose: Enables or disables the decoding of Universal Product Code (UPC)/European
Article Numbering (EAN) symbology. UPC/EAN are fixed length, numeric,
continuous symbologies that use four element widths. A reader that is
configured to decode EAN bar codes can decode UPC, but the reverse is not
true. UPC code is a subset of EAN code.
To define the UPC/EAN symbology, you set up to seven digits. The fifth,
sixth, and seventh digits are optional. To set the sixth digit, you must set the
fifth digit. To set the seventh digit, you must set all seven digits.
Default: First digit:
Second digit:
Third digit:
Fourth digit:
Fifth digit:
Sixth digit:
Seventh digit:
Syntax: CEdata
where data must be 4 to 7 digits selected from this list:
First digit:
Second digit:
Third digit:
Fourth digit:
Fifth digit:
Sixth digit:
Seventh digit:
BC
NF
Configuration Command Reference
UPC-A/EAN-13 enabled
UPC-E enabled
EAN-8 enabled
Supplementals allowed
Transmit check digit
Transmit number system digit
Retain leading zero for UPC-A
0 UPC-A/EAN-13 disabled
1 UPC-A/EAN-13 enabled
2 UPC-A only enabled
0 UPC-E disabled
1 UPC-E enabled
0 EAN-8 disabled
1 EAN-8 enabled
0 Supplementals are not allowed
1 Supplementals are allowed
0 Discard check digit
1 Transmit check digit
0 Discard number system digit
1 Transmit number system digit
0 Discard the leading zero for UPC-A
1 Retain the leading zero for UPC-A
12
12-97