Enter; Prepare For Reboot - Intermec Janus 2050 User Manual

JANUS 2050 Vehicle-Mount Computer User's Manual (4MB)

Enter

Purpose: Causes the JANUS 2050 to enter the current data record. It completes the entry
of a command. If no data exists, a null string is entered.
From host: Not supported
e
Keypad:
IRL command: Not supported
Enter
Scan:
**
**
DOS shuts off the printer echo for the duration of the error, which allows it to display
the error. As long as the printer echo has been requested (by entering a c - P ), DOS
turns the printer echo back on after the critical error is corrected. You can exit the
critical error by pressing c - P (to turn off console echo to the printer), and then
pressing A (to abort).

Prepare for Reboot

Purpose: Causes the PSK library to notify the BFT-ready PSK application that the host
wants to reboot the system and establish a binary file transfer (BFT) session.
The PSK application accepts the Prepare for Reboot command and sends a
Ready for Reboot message to the host. For help, see "Communicating With the
JANUS 2050" in Chapter 6.
From Host: ..+%1
..+%0
Keypad: Not supported
IRL command: Not supported
Scan: Not supported
9-8
Prepare for Reboot
Cancel the Prepare for Reboot command
39 nugget A