Accessing The Pc Card Drive - Intermec Janus 2050 User Manual

Vehicle-mount computer 4mb

Hide thumbs Also See for Janus 2050:

Table of Contents

For a complete list of Intermec-supported PC cards, contact your Intermec sales

representative.

Accessing the PC Card Drive

The PC card drive on the JANUS 2050 is located on the underside of the case.

The PC card drive is in a sealed unit to protect the PC card and drive from

possible contamination from the operating environment. You can use a Type I

or Type II PC card in the drive.

To insert a PC card

1. Make sure the JANUS 2050 is on. Press the q button to turn the JANUS

Note: The JANUS 2050 must be turned on when you insert a card into the

external drive or it may not recognize the card.

2. Using a straight-slot screwdriver, remove the two self-locking screws

(6 - 32 x 0.375) and two sealing washers on the PC card access door.

Using PC Cards

Self-locking screw and

sealing washer (2 places)