Using Configuration Manager - Intermec Janus 2050 User Manual

JANUS 2050 Vehicle-Mount Computer User's Manual (4MB)

Using Configuration Manager

This table lists problems that may occur when you load or unload the
Configuration Manager TSR.
Problem
When you try to start the
configuration application or IRL
Desktop, the JANUS 2050 displays an
error message indicating that there is
not enough memory available to run
the Configuration Manager.
You see the message "Configuration
Manager TSR is not loaded."
You see the message "Configuration
Manager TSR already loaded."
8-16
39 nugget
Solution
If the Configuration Manager TSR is unloaded when you start
Configuration Manager or the IRL Desktop, the JANUS 2050
automatically loads the TSR for you.
If there is not enough RAM available for the Configuration
Manager TSR, the JANUS 2050 displays an error message. Make
sure at least 50K of RAM is available.
You typed cfgmgr -d to unload the Configuration Manager TSR
from memory, but it has already been unloaded. No action is
required.
You typed cfgmgr to load the Configuration Manager TSR into
memory, but it has already been loaded. No action is required.
A