Intermec Janus 2050 User Manual page 188

code 39
nugget
helcond
Powering Up or Booting the JANUS 2050 (continued)
Problem
During a warm boot, the JANUS 2050
cannot finish booting and displays an
error message.
When the JANUS 2050 is turned on, it
goes to the Boot Loader menu.
39 nugget
Solution
If you press a key (especially the Ctrl, Alt, Shift, Caps Lock, or
Compound function keys) before the JANUS 2050 has finished
booting, you may see the message, "FA Keyboard Error, Press
F1 or F2." Press m to exit the error screen and the JANUS 2050
will continue booting.
If the JANUS 2050 appears to be locked up, press q to suspend
the JANUS 2050. When you turn the JANUS 2050 back on, the
Boot Loader menu displays the message, "Bad Saved State."
Press e to reboot the JANUS 2050.
Caution
Do not press any keys while the JANUS 2050 is
performing a warm boot or you may lose data.
Conseil
N'appuyez pas sur des touches pendant que le lecteur se
réamorce, sinon vous pouvez perdre des données.
If the JANUS 2050 was in storage mode, it will display a "Bad
Saved State" message. Press e to reboot the JANUS 2050.
When the next screen is displayed, press e again to exit
storage mode.
You can also see the "Bad Saved State" message if you press the
q key to suspend the JANUS 2050 while it is booting. Press e
to reboot the JANUS 2050.
Caution
When the JANUS 2050 performs a cold boot, all data on
the RAM disk is destroyed.
Conseil
Lorsque le lecteur s'amorçe à froid, les données se
trouvant sur le disque RAM sont détruites.
8
A Troubleshooting
8-5