Modifying Operations Parameters - Intermec Janus 2050 User Manual

Communications Parameters (continued)
Protocol
Point-to-Point
Polling Mode D
Multi-Drop
PC Standard

Modifying Operations Parameters

The operations configuration parameters include all areas that assist you in
using the JANUS 2050. The JANUS 2050 can be configured to:
nuggJVMU nugg
Modify data from bar code labels using preambles, postambles, and the key
code lookup table.
Disable specified commands.
Modify the beeper duration, frequency, and volume.
Modify the display mode and setup.
Modify the keypad clicker, c key functions, and numeric keypad.
Modify scanner operation with scanner data buffering, modes, redundancy,
timeout, trigger, and decode security.
JVMUConfiguring the JANUS 2050
Parameter
Baud rate, parity, data, and stop bits
Flow control
Intercharacter, turnaround, and timeout delay
Transmit abort timeout
Baud rate
Flow control
Transmit abort timeout
Baud rate, parity, data bits
Transmit abort timeout
Address, Multi-Drop
Baud rate, parity, data, and stop bits
4
4-5