Sel (Select) - Intermec Janus 2050 User Manual

Vehicle-mount computer 4mb

Hide thumbs Also See for Janus 2050:

Table of Contents

JANUS 2050 Vehicle-Mount Computer User's Manual (4MB)

SEL (Select)

Defines the character that requests permission for the controller to send data to

the polled device.

Note: You must select the communications port and protocol before setting the

parameters that define the protocol. Refer to the configuration command

"Communications Protocol, Configure" earlier in this chapter for more information on

defining protocols.

data can be any ASCII character

To disable SEL, scan the following bar code:

To set SEL to an ASCII character:

1. Scan the following bar code:

2. Scan a bar code for data from the full ASCII chart in Appendix A.

3. Scan the following bar code:

Enter Accumulate / SEL

Exit Accumulate