Lrc - Intermec Janus 2050 User Manual

LRC

Purpose: The Longitudinal Redundancy Check character is an error-checking character
that can be appended to transmitted and received blocks of data.
Note: You must select the communications port and protocol before setting the
parameters that define the protocol. Refer to the configuration command
"Communications Protocol, Configure" earlier in this chapter for more information on
defining protocols.
Default: Disabled
Syntax: IFdata
Acceptable values for data are:
0
1
Scan: One of the following labels:
Disable LRC
*$+IF0*
*$+IF0*
Enable LRC
*$+IF1*
*$+IF1*
LRC disabled
LRC enabled
39 nugget A
Configuration Commands
10
10-67