Intermec Janus 2050 User Manual page 371

JANUS 2050 Vehicle-Mount Computer User's Manual (4MB)
INTERLNK.EXE (continued)
Notes: (cont.) Limitations These commands do not work on devices running Interlnk:
CHKDSK
DISKCOMP
DISKCOPY
Interlnk does not redirect network, CD-ROM drives, or any other device that
uses a redirection interface. For example, you cannot access a network drive
that was redirected before Interlnk was started.
Examples: If the Interlnk files are located in the INTERLNK directory on the host
computer's drive C and you need to specify seven drives so that drives C
through G on the device will be redirected, add this line to the CONFIG.SYS
file on the device:
device=c:\interlnk\interlnk.exe /drives:7
If the Interlnk files are located in the root directory on drive D of the reader,
you used the serial port to connect to another computer, and you want to
start Interlnk without having the printers redirected, add this line to the
CONFIG.SYS file on the reader:
device=d:\interlnk.exe /com /noprinter /drives:7
To make Interlnk use a non-standard COM port whose address is 3F8, add
this line to your CONFIG.SYS file on the reader:
device=d:\interlnk.exe /com:3F8 /drives:7
C-6
39 nugget
FORMAT
MIRROR
SYS
A
UNDELETE
UNFORMAT