Baud Rate - Intermec Janus 2050 User Manual

Baud Rate

Purpose: Sets the baud rate for the selected communications port on the JANUS 2050. It
must match the baud rate of the device (for example, the host computer) that
the JANUS 2050 is communicating with.
Note: You must select the communications port and protocol before setting the
parameters to define that protocol. Refer to the configuration command
"Communications Protocol, Configure" later in this chapter for more information on
defining protocols.
For Polling Mode D protocol, the baud rate must be 1200 or higher. For Multi-
Drop protocol, the baud rate must be 2400 or higher.
Default: 9600 baud
Syntax: IAdata
Acceptable values for data are:
0
1
2
3
4
5
6
7
8
Scan: One of the following labels:
110 Baud
*$+IA0*
*$+IA0*
300 Baud
*$+IA1*
*$+IA1*
600 Baud
*$+IA2*
*$+IA2*
39 nugget
110 baud
300 baud
600 baud
1200 baud
2400 baud
4800 baud
9600 baud
19200 baud
38400 baud
A
Configuration Commands
10
10-7