Learning The Syntax Of Fta Commands - Intermec Janus 2050 User Manual

JANUS 2050 Vehicle-Mount Computer User's Manual

Learning the Syntax of FTA Commands

This section describes each FTA command and its syntax. You can abbreviate
the command names as shown in the Syntax column of the next table. Also,
you do not have to capitalize the commands; the commands are not case
sensitive.
FTA Command Descriptions and Syntax
Command Description
CHECKHOST Checks if the host computer
rebooted the device and is
ready to proceed with the
device as the server and the
host computer as the client.
You can type this command
only from the device's DOS
command line.
CLOSE Terminates the connection
with the host computer. You
can abbreviate this command
as CL.
EXIT Terminates the FTA program
and returns you to the DOS
prompt on the device.
GET Copies a file from the host
computer to the device.
HELP Displays a description of the
FTA commands, syntax, and
parameters.
LUPGRADE Upgrades the device's drive C
from the device. Stands for
"local upgrade."
6-30
ode30
(4MB)nubbet nubbet code30
Syntax
ch [ port ]
where:
port is the COM port for the connection. If you do
not specify a port, the application uses the
first port with an active protocol handler.
c
e
g hfile [ rfile ]
where:
hfile is the path and filename of the file to be
transferred from the host computer to the
device.
rfile
is the destination path and filename on the
device. If you do not specify a rfile name, the
hfile name is used.
h
l file c
where:
file is the path and filename of the image file on
the JANUS device, and C is the drive to be
updated.
icon icon