Intermec Janus 2050 User Manual page 405

Vehicle-mount computer 4mb

Hide thumbs Also See for Janus 2050:

Table of Contents

JANUS 2050 Vehicle-Mount Computer User's Manual (4MB)

One of two ways to boot the device; compare to cold boot. A warm boot

performs the power-on self test (POST) to ensure that the hardware and

peripherals are operational, runs CONFIG.SYS and AUTOEXEC.BAT, and

displays the DOS prompt. The contents of both conventional memory and the

physical RAM drive (drive E) remain intact. You may warm boot the device to

execute startup files, such as AUTOEXEC.BAT, that have changed. You may

also warm boot to start Interlnk.

A type of software flow control for communications between digital devices. It

stops the host from sending data when the device buffer fills up (XOFF) and

starts it again when the buffer empties (XON).

Troubleshooting