Plessey - Intermec Janus 2050 User Manual

JANUS 2050 Vehicle-Mount Computer User's Manual (4MB)

Plessey

Purpose: Enables/disables decoding of Plessey symbology. Plessey code is pulse-width-
modulated. It includes a start character, data characters, an eight-bit cyclic
check digit, a termination bar, and usually a reverse start character. The code is
continuous and not self-checking. Plessey code has two parameters that need
to be configured: start code and check digit.
Default: Disabled
Syntax: CIdata
Acceptable values for data are:
00 Disabled
10 Plessey with reverse start code
30 Transmit check digit
31 Discard check digit
Scan: To disable Plessey:
Disable Plessey
*$+CI00*
*$+CI00*
Or: To set Plessey, complete the following steps:
1. Scan the following bar code:
2. Scan one of the following bar codes to transmit or retain the check digit:
10-72
Plessey With Reverse Start Code
*$+CI10*
*$+CI10*
Transmit Check Digit
*$+CI30*
*$+CI30*
39 nugget A
Discard Check Digit
*$+CI31*
*$+CI31*