Intermec Janus 2050 User Manual page 145

JANUS 2050 Vehicle-Mount Computer User's Manual
Example
Suppose the host computer is the client and has two hard drives (C and D) and
one disk drive (A). The JANUS 2050 is the server and has four drives: three
simulated drives (C, D, and E) and a PC card drive (G).
Host Computer
(client)
Drive redirected
from the reader
Interlnk redirects
the drives
The client's drive G is redirected from the server's (JANUS 2050) drive C. If you
type the command dir g:\ on the client, a list of files located in the root
directory of the JANUS 2050 drive C is displayed.
The following sections describe what hardware and software you need to use
Interlnk/Intersvr, how to get Interlnk/Intersvr running, and several
procedures for using Interlnk/Intersvr.
6-14
When the JANUS 2050 and host computer are
connected through Interlnk, drives on the JANUS
2050 (server) appear as additional drives on the host
computer (client). In addition to drives A, C, and D,
the host computer now has drives F, G, H, and J.
J2050 (server)
I n t
e r l i n k
2050U.018
ode30
(4MB)nubbet nubbet code30
Client
Drives
A
B
C
D
F redirected from
G redirected from
H redirected from
I placeholder for
internal PC card
drive
J redirected from
icon icon
Server
Drives
C
D
E
F
G