Intermec Janus 2050 User Manual page 162

nubbet nubbet code30
FTA Command Descriptions and Syntax (continued)
Command Description
OPEN
Establishes a connection with
the host computer.
PUT Copies a file from the device
to the host computer.
RUPGRADE Upgrades the device's drive C
from the host. Stands for
"remote upgrade."
SERVER Identifies the device as the
server, not the client. You will
type all subsequent FTA
commands at the host.
ode30
iconCommunicating With the JANUS 2050
icon
Syntax
o [ port ]
where:
port can be the COM port for the connection. If
you do not specify a port, the application
uses the first port with an active protocol
handler. Once a connection is open, you can
type other FTA commands or type
p rfile [ hfile ]
where:
rfile is the path and filename of the file to be
transferred from the device to the host.
hfile is the destination path and filename on the
host. If you do not specify an hfile name, the
rfile name is used.
r file c
where:
file is the path and filename of the image file on
the host computer, and C is the drive to be
upgraded.
s [ port ]
where:
port is the COM port for the connection. If you do
not specify a port, the application uses the
first port with an active protocol handler.
6

to exit.
6-31