Using A Command Line - Intermec Janus 2050 User Manual

ode30
nubbet code30 nubbet
The commands listed in the File menu are described next:
Communications
File Cfg Stat
Port...
Transmit...
Receive...
About
Exit
Receive Stores the file it receives from the designated COM port under the
selected filename. A screen displays the status of the transfer.
About Displays the software version.
Exit Exits the Communications Manager.
Use the following instructions to move around in the menus and select commands
• When a pull-down menu is displayed, select a command by pressing h or
j to move the highlight to the desired command, and then press e to
choose the command.
• The dialog boxes list the options for that menu. When a dialog box is
displayed, press h or j or Tab/BackTab to move to the desired field.
• Pressing e is the same as choosing OK. It exits the dialog box and saves
the changes.
• Pressing d is the same as choosing CANCEL. It exits the dialog box
without saving changes.
• To exit Communications Manager, select Exit in the File pull-down menu
and press e .
You can scan the bar code labels listed in Appendix A to move the cursor
through the communications menus instead of pressing keys.

Using a Command Line

You can use a DOS command line instead of the menu system to transmit and
receive files with the Communications Manager utility. The syntax for the
command is:
cmgr -[{ port }{ ph }] -p{ port } -s{ direction }
-f[ path\ ]{ filename }
iconCommunicating With the JANUS 2050
icon
Port This command lets you select which
port to communicate through. COM1 is
the optical serial port.
Transmit Transmits the selected file
through the designated COM port. A
screen displays the status of the transfer.
2050U-032
6
6-21