Intermec Janus 2050 User Manual page 103

JANUS 2050 Vehicle-Mount Computer User's Manual (4MB)
The dialog boxes list the options for the configuration parameters. The field
below the option will be either a toggle or an entry field. When a dialog box
displays, press h or j or Tab/BackTab to move the highlight to the desired
field. In a highlighted field, either enter a value or press g or i to view the
options for that field.
A few dialog boxes contain check boxes. Check boxes are used when more than
one option can be selected at a time. Press s to mark or clear check boxes.
4-8
Configuration
File Sym Com
Load...
Load Default
Save
Save As...
About
Exit
?
Configuration
File Sym Com
Amble...
Beeper...
Reader Cmds
Display...
Viewport...
Keypad...
Scanner...
IRL...
Power Mgmt...
Key Codes
?
Pressing e is the same as choosing OK. It exits the dialog box and saves
the changes.
Pressing d is the same as choosing Cancel in single screen configurations
only. It exits the dialog box without saving the changes.
When you set parameters on multiple screens, such as communications
protocol, use the Next and Prev commands to move between the screens.
39 nugget 39
nugget A
To select a menu in the menu bar, press
Op
g or i to move the highlight to the
desired menu. To view the drop-down
menu, press e or j .
2050U.060
The Sym, Com, and Op drop-down
Op
menus list the various configuration
selections. An asterisk (*) on the Sym or
Com protocol drop-down menu
indicates that the symbology or protocol
is active. When a drop-down menu is
displayed, select a command by
pressing h or j to move the highlight
to the desired command, and then press
e to choose the command. Press d to
exit a menu.
2050U.062
A