Erasing A Previously Formatted Flash Pc Card - Intermec Janus 2050 User Manual

JANUS 2050 Vehicle-Mount Computer User's Manual (4MB)
9. Press d to exit MCFORMAT. You are ready to use the flash card.
Note: If you have trouble formatting the flash card, or the JANUS 2050 will not
recognize the card, you may need to install additional flash card drivers. For help, see
"Using PC Cards," in Chapter 8.

Erasing a Previously Formatted Flash PC Card

If your flash card has already been formatted, you must erase the card and
clear its memory before you can format the card again.
Note: If your flash card has never been formatted, proceed to the next section.
1. Insert the flash card in the PC card drive.
2. Type this command and press e :
3. Press 3 to select Option 3. You will see the following information.
5-14
mcformat
The MCFORMAT main menu appears.
PC Memory Card Formatter
(C) 1994 INTEL Corporation
Copyright 1994 SystemSoft Corp. All Rights Reserved
Version 1.01 (241 3-05)F
MCFORMAT options
Choose one of the following:
1. Create and format a new partition.
2. Format an existing partition.
3. Erase a partition.
4. Display partition information.
Enter your choice. [4]
To quit MCFORMAT, press [ESC].
Erase a partition.
Drive Beg address
G O
Which drive would you like to select?
Drive =
39 nugget
End address Type Status
4194303 FTL Formatted
A
2050U.015
Size
4096K
2050U.016