Understanding Audio Signals And Beep Sequences - Intermec Janus 2050 User Manual

JANUS 2050 Vehicle Mount Computer User's Manual (4MB)

Understanding Audio Signals and Beep Sequences

The JANUS 2050 has a beeper to indicate status. The following table indicates
the purpose of each beep sequence or audio signal. You can change the beep
volume in the JANUS 2050's configuration.
Signal/Beep
Sequence
L
H
LH
HL
LLL
LHL
HLH
HHH
LLHH
C
C
Chirp (continual)
Shadow or double
beep/click
C=click, L=low beep, H=high beep
2-20
39 nugget
Meaning
Valid command or data accumulated.
Valid data entered, label decoded, last row of a two
dimensional symbology decoded, or the power-on-self-test
(POST) passed on a cold boot.
Valid PC card inserted.
Valid PC card removed.
Invalid command or data, or an IRL syntax error was found
while compiling.
IRL runtime error (a nonfatal error).
Input/output (I/O) error.
Configuration error or a fatal IRL error.
Updating JANUS 2050 configuration.
Key pressed.
One row of a two-dimensional symbology decoded (Code 16K
and Code 49).
Battery is low. Chirp sounds every 15 seconds.
Battery is low. The second beep or click is a lower tone that
shadows the first.
A