Intermec Janus 2050 User Manual page 255

JANUS 2050 Vehicle-Mount Computer User's Manual (4MB)
Communications Port, UART Restore (continued)
Or: To set the hex value:
1. Scan one of the following bar code:
2. Scan two bar codes for data from the full ASCII chart in Appendix A.
3. Scan the following bar code:
10-36
Enter Accumulate/Change Configuration/COM1
*+/$+IV*
*+/$+IV*
Enter Accumulate/Change Configuration/COM2
*+/$+IW*
*+/$+IW*
End Accumulate
*-/*
*-/*
Repeat Steps 1 through 3 for a second COM port if necessary.
39 nugget A