Input Device Connector - Intermec Janus 2050 User Manual

JANUS 2050 Vehicle-Mount Computer User's Manual (4MB)

Input Device Connector

The JANUS 2050 can use several input devices to scan bar codes. For a list of
input devices that you can use, see "JANUS 2050 Accessories" in Chapter 1.
Before using optional equipment such as a laser scanner with the JANUS 2050,
be sure to read the manual that comes with the device to ensure proper
operation and safety.
To connect a laser scanner to the JANUS 2050, attach a connector cable to the
input device connector on the back of the JANUS 2050. The connector is keyed
so that the input device cable can only be inserted one way.
The input device port on the JANUS 2050 is shared with COM2. Only one
device at a time can be configured to use this port. For detailed information on
configuring the COM2 port see "Communications Port, Choosing Scanner or
COM2" in Chapter 10. The default settings configure this port for a scanner.
Note: The cable used to connect 151X or 1545 scanners with a 9450 VMU are not
compatible with the JANUS 2050. For a list of standard connector cables, see "JANUS
2050 Accessories" in Chapter 1.
B-6
39 nugget A