Intermec Janus 2050 User Manual page 159

JANUS 2050 Vehicle-Mount Computer User's Manual
To make the device the client
1. Type this command at the device's DOS prompt to start the FTA:
2. Type this command at the FTA prompt to open a BFT session:
3. From the device, type the commands to transfer binary files or update the
To make the device the server
There are two ways to make the device the server:
1. Type this command at the device's DOS prompt to start the FTA:
2. Type this command at the FTA prompt to make the device the server:
3. From the host computer, type the commands to transfer binary files or
Or,
1. Send the Prepare for Reboot command from the host computer to start the
2. When you receive the Ready For Reboot message from the device, send the
3. From the host computer, type the commands to transfer binary files or
Note: Because you cannot display the server's directories from the client, you must
already know where each target file is located on the server.
6-28
fta
open
device's drive C.
fta
server
update the device's drive C.
FTA on the device.
Reboot command from the host computer to the device. This command
reboots the device and opens the BFT session.
update the device's drive C.
ode30
(4MB)nubbet nubbet code30
icon icon