Dutch Post Settings; Ean/Upc Settings - Intermec CN51 User Manual

Chapter 3 — Use the Scanner
54

Dutch Post Settings

This section lists all configurable settings for decoding the Dutch Post
symbology.
Dutch Post Settings and Descriptions
Setting
User defined symbology ID
Code mark

EAN/UPC Settings

This section lists the configurable settings for decoding the EAN/UPC
symbology.
EAN/UPC Settings and Descriptions
Setting
UPC-A
UPC-E
EAN-8
EAN-13
UPC-E1
Add-on digits
Description
Sets the symbology ID for Dutch Post.
Range is 1 to 4 ASCII characters. \xFF is
not supported.
Default is P4.
A one-character code mark that serves as
an identifier for Dutch Post.
Default is *.
Description
Enables or disables UPC-A decoding. Default is
enabled.
Enables or disables UPC-E decoding. Default is
enabled.
Enables or disables EAN-8 decoding. Default is
enabled.
Enables or disables EAN-13 decoding. Default is
enabled.
Enables or disables UPC-E1 decoding. Default is
disabled.
Sets whether or not add-on digits must be present in
the bar code. Options include:
•
Transmit if found (default): The scanner reads all
bar codes.
•
Controlled by add-on digits: The scanner reads
the bar code only if add-on digits are present.
CN51 Mobile Computer User Manual