Understanding The Status Leds - Intermec Janus 2050 User Manual

Understanding the Status LEDs

The four LEDs located to the left of the screen display the status of the
following JANUS 2050 functions.
Status
LEDs
Status LEDs
Conn
Conn
Conn
Ctrl
Ctrl
Ctrl
39 nugget
I/O
Conn Data
Ctrl Alt
Shift
Caps
f
Color
Data Yellow
Red/Orange
Data
Note: Do not turn off the JANUS 2050 when the Conn/Data light is on.
When you power up, the JANUS 2050 attempts to send any data in the
radio buffer. Depending on the time between power down and power up,
this data could be meaningless and/or disrupt the host application. The
operator who turns on the unit could also be confused by a display screen
containing instructions or data unrelated to his or her work.
Green
Data
Yellow
Alt
Red/Orange
Alt
Green
Alt
A
Operating the JANUS 2050
2050U.004
Description
Indicates communication with the network
controller is established.
Data is buffered in the JANUS 2050 RF interface.
A connection is established with the network
controller and data transfer is taking place.
Ctrl c function is enabled.
Alt a function is enabled.
Both Ctrl c and Alt a functions are enabled.
2
2-17