Intermec Janus 2050 User Manual page 169

JANUS 2050 Vehicle-Mount Computer User's Manual (4MB)
where:
port indicates the port for which you are loading the protocol handler. Use 1 to
load the protocol handler for COM1.
ph is the notation for the protocol handler you want to load. Use i for the
Intermec protocol handler. Use p for the PC standard protocol handler.
For example, to load the Intermec protocol handler on COM1 and execute the
IRL Desktop, enter the following command at the JANUS 2050 DOS prompt:
irl -1i
In the menu bar, there are two pull-down menus:
The commands listed in the File menu are described next:
File Stats Indicates if the selected data file is dimensioned or undimensioned
and the number of records entered. If the file is dimensioned, it will also list the
dimensions.
Clear Data Deletes the default IRL data files {IRL-0}.IRD, {IRL-A}.IRD to
{IRL-Z}.IRD. Data files that you specifically create are not deleted.
Receive Stores the file it receives from the designated communications port
under the selected filename.
Transmit Transmits the selected file through the designated communications
port.
Exit Exits the IRL Desktop.
7-6
IRL
File About
IRL
File About
Run...
Resume...
Directory...
Change Dir...
File Stats...
Clear Data...
Receive...
Transmit...
Exit
39 nugget
File Select the File menu to transfer
files, change directories, review file
status, and begin executing an IRL
program. You quit the IRL Desktop by
choosing Exit from this menu.
About Lists the amount of RAM and
2050U.093
disk space available and displays your
current directory.
Run Executes the selected IRL program.
Resume Resumes running a program
that was previously halted.
Directory Lists all IRL files in the
current directory.
Change Dir Changes the current drive
and directory.
2050U.094
A