Variable Data - Intermec Janus 2050 User Manual

JANUS 2050 Vehicle-Mount Computer User's Manual (4MB)

Variable Data

You must enter commands that require variable data in the following
sequence. For example, you can set the EOF character to any ASCII character.
If you want to set the EOF character to SOH:
1. Scan the following bar code to enter Accumulate mode and change the
2. Scan a bar code from the full ASCII chart in Appendix A. SOH has been
3. Scan the Exit Accumulate bar code:
When the Exit Accumulate label is scanned, the JANUS 2050 updates the
configuration for EOF.
10-4
configuration ($+) for EOF (FA):
Enter Accumulate / Set EOF
*+/$+FA*
*+/$+FA*
included here as an example:
SOH
*$A*
*<SOH>*
Exit Accumulate
*-/*
*-/*
39 nugget A