Intermec Janus 2050 User Manual page 377

JANUS 2050 Vehicle-Mount Computer User's Manual (4MB)
The next tables describe how the two LOADADD commands work depending
on the information you include in the command and whether you installed
Auto-Loader for a DOS NLS country.
Command:
DOS NLS Support?
Command:
DOS NLS Support?
C-12
loadadd nls
Description
No • Creates an image file that contains the three startup files in
C_FILES\COMMON and all files currently on drive C.
• Loads the image file ondrive C.
• Overwrites only the startup files on drive C.
Yes • Creates an image file that contains the three startup files in
C_FILES\COMMON and all files currently on drive C.
• Appends commands to AUTOEXEC.BAT and
CONFIG.SYS to support the DOS NLS language.
• Loads the image file on drive C.
• Overwrites only the startup files on drive C.
loadadd path \ filename [ path \ filename... ]
Description
No • Creates an image file that contains files you specify in the
command and all files currently on drive C.
• Loads the image file on drive C.
• Overwrites files on drive C only if the command contains a
file with the same name.
Yes • Creates an image file that contains files you specify in the
command, all files currently on drive C, and the three
startup files in C_FILES\COMMON unless you specify
startup files in the command.
• Appends commands to AUTOEXEC.BAT and
CONFIG.SYS to support the DOS NLS language.
• Loads the image file ondrive C.
• Overwrite files on drive C only if the command contains a
file with the same name.
39 nugget A