Upc/Ean Default Settings - Intermec 700 Series User Manual

Parameter
Decoding
UPC-A
UPC-E
EAN-8
EAN-13
Add On Digits
Add On 2 Digits
Add On 5 Digits
UPC-A Check Digit
UPC-E Check Digit
EAN-8 Check Digit
EAN-13 Check Digit
UPC-A Number System Transmitted
UPC-E Number System Transmitted
Reencode UPC-A
Reencode UPC-E
Reencode EAN-8
typedef enum tagUpcEanDecoding
{
ITC_UPCEAN_NOTACTIVE = 0,
ITC_UPCEAN_ACTIVE = 1,
ITC_UPCEAN_NO_CHANGE = 255
} ITC_UPCEAN_DECODING;
typedef enum tagUpcASelect
{
ITC_UPCA_DEACTIVATE,
ITC_UPCA_ACTIVATE,
ITC_UPCA_NO_CHANGE = 255
} ITC_UPCA_SELECT;
typedef enum tagUpcESelect
{
ITC_UPCE_DEACTIVATE,
ITC_UPCE_ACTIVATE,
ITC_UPCE_NO_CHANGE = 255
} ITC_UPCE_SELECT;
typedef enum tagEan8Select
{
ITC_EAN8_DEACTIVATE,
ITC_EAN8_ACTIVATE,
ITC_EAN8_NO_CHANGE = 255
} ITC_EAN8_SELECT;
typedef enum tagEan13Select
{
ITC_EAN13_DEACTIVATE,
700 Series Color Mobile Computer User's Manual

UPC/EAN Default Settings

Default
ITC_UPCEAN_NO_CHANGE This parameter is no longer used, set it to this value.
Active
Active
Active
Active
Not Required
Not Active
Not Active
Transmitted
Transmitted
Transmitted
Transmitted
UPC-A transmitted as EAN-13
UPC-E transmitted as UPC-E
EAN-8 transmitted as EAN-8
UPC/EAN Enumerations
Valid Range
ITC_UPCA_SELECT
ITC_UPCE_SELECT
ITC_EAN8_SELECT
ITC_EAN13_SELECT
ITC_UPCEAN_ADDON_DIGITS
ITC_UPCEAN_ADDON_TWO
ITC_UPCEAN_ADDON_FIVE
ITC_UPCA_CHECK_DIGIT
ITC_UPCE_CHECK_DIGIT
ITC_EAN8_CHECK_DIGIT
ITC_EAN13_CHECK_DIGIT
ITC_UPCA_NUMBER_SYSTEM
ITC_UPCE_NUMBER_SYSTEM
ITC_UPCA_REENCODE
ITC_UPCE_REENCODE
ITC_EAN8_REENCODE
// Default
// Default
// Default
// Default
Chapter 6 — Scanner Support
201