Beep Frequency - Intermec Janus 2050 User Manual

Beep Frequency

Purpose: Defines the individual frequencies of the default/IRL JANUS 2050 beeps. There
are two types of beep: high/IRL 1 and low/IRL 0.
Default: 1000 Hz for low beeps
2000 Hz for high beeps
Syntax: BFdata
Acceptable values for data are: from 20 to 20,000 Hz (20 KHz).
Note: Setting the frequency outside the range of 100 Hz to 10,000 Hz makes the beeps
inaudible.
Scan: 1. Scan the following bar code:
2. Scan a numeric value for data in Hz from the following bar codes:
Enter Accumulate / Beep Frequency
*+/$+BF*
*+/$+BF*
*0*
*0*
*2*
*2*
*4*
*4*
*6*
*6*
*8*
*8*
39 nugget A
Configuration Commands
*1*
*1*
*3*
*3*
*5*
*5*
*7*
*7*
*9*
*9*
10
10-11