Configuring, Formatting, And Using Pc Cards - Intermec Janus 2050 User Manual

Configuring, Formatting, and Using PC Cards

You need to configure the JANUS 2050 and format a PC card before you can
use a card in your JANUS 2050. The next table shows a brief overview of the
process for each type of PC card. After you scan this overview, you may want
to read the following sections for more details.
Step 1:
Type of Card Configure the JANUS
2050
ATA Edit the
AUTOEXEC.BAT and
CONFIG.SYS files and
activate or add card
drivers and utilities.
Flash Edit the CONFIG.SYS
file and activate or
add card drivers and
utilities.
I/O (Modem) Edit the
AUTOEXEC.BAT and
CONFIG.SYS files and
activate or add card
drivers and utilities.
SRAM Edit the CONFIG.SYS
file and activate or
add card drivers and
utilities.
Note: SRAM card is the
default in the JANUS
2050 CONFIG.SYS file.
The next sections give you detailed instructions to configure, format, and use
ATA, flash, I/O, and SRAM PC cards.
39 nugget
Step 2:
Format the Card
Use ATAINIT.EXE
and FORMAT.COM:
atainit {drive:}
format {drive:}
Use
MCFORMAT.EXE:
mcformat
No formatting is
required.
Use FORMAT.COM:
format {drive:}
A Using PC Cards
Step 3:
Use the Card
Use DOS commands, for
example:
copy
delete
move
Use DOS commands, for
example:
copy
delete
move
Use a commercially available
communications program.
Use DOS commands, for
example:
copy
delete
move
5
5-9