Aff (Affirmative Acknowledge) - Intermec Janus 2050 User Manual

Vehicle-mount computer 4mb

Hide thumbs Also See for Janus 2050:

Table of Contents

JANUS 2050 Vehicle-Mount Computer User's Manual (4MB)

AFF (Affirmative Acknowledge)

Enables or disables the handshake event that is an affirmative acknowledge to

a message. AFF and NEG must both be enabled to have a valid configuration.

Note: You must select the communications port and protocol before setting the

parameters to define that protocol. Refer to the configuration command

"Communications Protocol, Configure" later in this chapter for more information on

defining protocols.

AFF disabled

data can be any ASCII character.

To disable AFF, scan the following bar code:

To set AFF to an ASCII character:

1. Scan the following bar code:

2. Scan a bar code for data from the full ASCII chart in Appendix A.

3. Scan the following bar code:

Enter Accumulate / AFF

Exit Accumulate