Scanner Mode - Intermec Janus 2050 User Manual

JANUS 2050 Vehicle-Mount Computer User's Manual (4MB)

Scanner Mode

Purpose: Defines how the scanner operates when you pull the trigger. Two scanner
modes are available:
Note: This configuration is applicable only when using a scanner with the reader.
Default: One-shot mode
Syntax: SBdata
Acceptable values for data are:
0
1
Scan: One of the following labels:
One-Shot Mode
*$+SB0*
*$+SB0*
10-82
One-shot mode requires you to pull the trigger each time you want to scan
a bar code. Once the bar code is scanned, the scanner turns off.
Automatic mode allows you to pull the trigger once and scan a series of bar
codes. Releasing the trigger turns the scanner off. To scan the same bar
code more than once, you must release the trigger or scan a different bar
code before attempting a second scan.
One-shot mode
1461 Automatic mode
39 nugget A
Automatic Mode
*$+SB1*
*$+SB1*