Miscellaneous; User Parameter Sets; Data Storage Parameters - ABB ACS880 Firmware Manual

70 Program features

Miscellaneous



User parameter sets

The drive supports four user parameter sets that can be saved to the permanent
memory and recalled using drive parameters. It is also possible to use digital inputs to
switch between user parameter sets.
A user parameter set contains all editable values in parameter groups 10...99 except
• I/O extension module settings (groups 14...16)
• data storage parameters (group 47)
• fieldbus communication settings (groups 51...56), and
• encoder configuration settings (groups 92...93).
As the motor settings are included in the user parameter sets, make sure the settings
correspond to the motor used in the application before recalling a user set. In an
application where different motors are used with the drive, the motor ID run needs to
be performed with each motor and the results saved to different user sets. The
appropriate set can then be recalled when the motor is switched.
Settings
Parameters 96.10...96.13


Data storage parameters

Twenty-four (sixteen 32-bit, eight 16-bit) parameters are reserved for data storage.
These parameters are unconnected by default and can be used for linking, testing
and commissioning purposes. They can be written to and read from using other
parameters' source or target selections.
Settings
Parameter group 47 Data storage
(page 296).
(page 250).