Operation Mode - ABB ACS880 Firmware Manual
Primary control program
Hide thumbs
Also See for ACS880:
- Firmware manual (764 pages) ,
- Manual (646 pages) ,
- Quick start up manual (146 pages)
Table of Contents
Advertisement
No.
Name/Value
16.82
AO1 out at AO1 src
min
16.83
AO1 out at AO1 src
max
19
19 Operation mode
19.01
Actual operation
mode
Zero
Speed
Torque
Min
Max
Add
Power
Scalar (Hz)
Scalar (rpm)
Forced magn.
19.11
Ext1/Ext2 selection
EXT1
EXT2
FBA A MCW bit 11
DI1
DI2
DI3
DI4
DI5
DI6
DIO1
DIO2
Other [bit]
19.12
Ext1 control mode
Zero
Description
(Visible when
16.01 Module 3 type
See parameter
14.82 AO1 out at AO1 src
(Visible when
16.01 Module 3 type
See parameter
14.83 AO1 out at AO1 src
Selection of local and external control location sources and
operating modes.
See also section
Operating modes of the drive
Displays the operating mode currently used.
See parameters 19.11...19.14.
This parameter is read-only.
None.
Speed control (in DTC motor control mode).
Torque control (in DTC motor control mode).
The torque selector is comparing the output of the speed
controller
(25.01 Torque reference speed
reference
(26.74 Torque ref ramp
two is used.
The torque selector is comparing the output of the speed
controller
(25.01 Torque reference speed
reference
(26.74 Torque ref ramp
two is used.
The speed controller output is added to the torque reference.
Power control (in power converter systems).
Frequency control in scalar motor control mode.
Speed control in scalar motor control mode.
Motor is in magnetizing mode.
Selects the source for external control location EXT1/EXT2
selection.
0 = EXT1
1 = EXT2
EXT1 (permanently selected).
EXT2 (permanently selected).
Control word bit 11 received through fieldbus interface A.
Digital input DI1
(10.02 DI delayed
Digital input DI2
(10.02 DI delayed
Digital input DI3
(10.02 DI delayed
Digital input DI4
(10.02 DI delayed
Digital input DI5
(10.02 DI delayed
Digital input DI6
(10.02 DI delayed
Digital input/output DIO1
Digital input/output DIO2
Source selection (see
Terms and abbreviations
Selects the operating mode for external control location
EXT1.
None.
= FIO-11)
min.
= FIO-11)
max.
(page 22).
control) and torque
out) and the smaller of the
control) and torque
out) and the greater of the
status, bit 0).
status, bit 1).
status, bit 2).
status, bit 3).
status, bit 4).
status, bit 5).
(11.02 DIO delayed
status, bit 0).
(11.02 DIO delayed
status, bit 1).
on page 88).
Parameters 141
Def/FbEq16
0.000 mA
20.000 mA
-
1
2
3
4
5
6
9
10
11
20
EXT1
0
1
2
3
4
5
6
7
8
11
12
-
Speed
1
Advertisement
Table of Contents
