ABB ACS880 Firmware Manual page 203

No. Name/Value
32.06 Supervision 1
action
No action
Warning
Fault
32.07 Supervision 1
signal
Zero
Speed
Frequency
Current
Torque
DC voltage
Output power
AI1
AI2
Speed ref ramp in
Speed ref ramp out
Speed ref used
Torque ref used
Freq ref used
Process PID output
Feedback act value
Other
32.08 Supervision 1 filter
time
0.000 ... 30.000 s
32.09 Supervision 1 low
-21474830.00 ...
21474830.00
32.10 Supervision 1 high
-21474830.00 ...
21474830.00
32.15 Supervision 2
function
Disabled
Low
High
Description
Selects the action the drive takes when the value monitored
by signal supervision 1 exceeds its limits.
Note: This parameter does not affect the status indicated by
32.01 Supervision status.
No action taken.
A warning (A8B0 Signal
The drive trips on 80B0 Signal
Selects the signal to be monitored by signal supervision
function 1.
None.
01.01 Motor speed used
01.06 Output frequency
01.07 Motor current (page 91).
01.10 Motor torque % (page 91).
01.11 DC voltage (page 91).
01.14 Output power (page 91).
12.11 AI1 actual value (page 113).
12.21 AI2 actual value (page 114).
23.01 Speed ref ramp input
23.02 Speed ref ramp output
24.01 Used speed reference
26.02 Torque reference used
28.02 Frequency ref ramp output
40.01 Process PID output actual
40.02 Process PID feedback actual
Source selection (see Terms and abbreviations
Defines a filter time constant for the signal monitored by
signal supervision 1.
Signal filter time.
Defines the lower limit for signal supervision 1.
Low limit.
Defines the upper limit for signal supervision 1.
Upper limit.
Selects the mode of signal supervision function 2. Determines
how the monitored signal (see parameter 32.17) is compared
to its lower and upper limits
The action to be taken when the condition is fulfilled is
selected by 32.16.
Signal supervision 2 not in use.
Action is taken whenever the signal falls below its lower limit.
Action is taken whenever the signal rises above its upper
limit.
supervision) is generated.
supervision.
(page 91).
(page 91).
(page 164).
(page 164).
(page 169).
(page 177).
(page 182).
(page 225).
(page 226).
on page 88).
(32.19 and 32.20 respectively).
Parameters 203
Def/FbEq16
No action
0
1
2
Zero
0
1
3
4
6
7
8
9
10
18
19
20
21
22
24
25
-
0.000 s
1000 = 1 s
0.00
-
0.00
-
Disabled
0
1
2