ABB ACS880 Firmware Manual page 123

No. Name/Value
14.22 AI force selection
Bit Value
0 1 = Force AI1 to value of parameter
1 1 = Force AI2 to value of parameter
2 1 = Force AI3 to value of parameter
3...15 Reserved.
0000h ... FFFFh
14.23 DIO3 OFF delay
0.0 ... 3000.0 s
14.24 DIO4 function
Output
Input
14.26 DIO4 output source
14.26 AI1 actual value
-22.000 ... 22.000
mA or V
14.27 DIO4 ON delay
*DIO status
**Delayed DIO status
t = 14.27 DIO4 ON delay
On
t = 14.28 DIO4 OFF delay
Off
*Electrical status of DIO (in input mode) or status of selected source (in output mode). Indicated by
status.
**Indicated by 14.06 DIO delayed
0.0 ... 3000.0 s
Description
(Visible when 14.01 Module 1 type
The true readings of the analog inputs can be overridden for
eg. testing purposes. A forced value parameter is provided for
each analog input, and its value is applied whenever the
corresponding bit in this parameter is 1.
Forced values selector for analog inputs.
(Visible when 14.01 Module 1 type
Defines the deactivation delay for digital input/output DIO3.
See parameter 14.22 DIO3 ON
Deactivation delay for DIO3.
(Visible when 14.01 Module 1 type
Selects whether DIO4 of the extension module is used as a
digital input or output.
DIO4 is used as a digital output.
DIO4 is used as a digital input.
(Visible when 14.01 Module 1 type
Selects a drive signal to be connected to digital input/output
DIO4 when parameter 14.24 DIO4 function
For the available selections, see parameter
output source.
(Visible when 14.01 Module 1 type
Displays the value of analog input AI1 in mA or V (depending
on whether the input is set to current or voltage).
This parameter is read-only.
Value of analog input AI1.
(Visible when 14.01 Module 1 type
Defines the activation delay for digital input/output DIO4.
t t
On Off
status.
Activation delay for DIO4.
= FIO-11)
14.28 AI1 force data.
14.43 AI2 force data.
14.58 AI3 force data.
= FIO-01)
delay.
= FIO-01)
= FIO-01)
is set to Output.
14.11 DIO1
= FIO-11)
= FIO-01)
t
On
Parameters 123
Def/FbEq16
00000000h
1 = 1
0.0 s
10 = 1 s
Input
0
1
Not
energized
-
1000 = 1 mA
or V
0.0 s
1
0
1
0
Time
t
Off
14.05 DIO
10 = 1 s