ABB ACS880 Firmware Manual page 121

No. Name/Value
Supervision 3
Other [bit]
14.12 DIO1 ON delay
*DIO status
**Delayed DIO status
t = 14.12 DIO1 ON delay
On
t = 14.13 DIO1 OFF delay
Off
*Electrical status of DIO (in input mode) or status of selected source (in output mode). Indicated by
status.
**Indicated by 14.06 DIO delayed
0.0 ... 3000.0 s
14.13 DIO1 OFF delay
0.0 ... 3000.0 s
14.14 DIO2 function
Output
Input
14.15 DIO2 filter gain
7.5 us
195 us
780 us
4.680 ms
14.16 DIO2 output source
Description
Bit 2 of 32.01 Supervision status
Source selection (see Terms and abbreviations
Defines the activation delay for digital input/output DIO1.
t t
On Off
status.
Activation delay for DIO1.
Defines the deactivation delay for digital input/output DIO1.
See parameter 14.12 DIO1 ON
Deactivation delay for DIO1.
Selects whether DIO2 of the extension module is used as a
digital input or output.
DIO2 is used as a digital output.
DIO2 is used as a digital input.
(Visible when 14.01 Module 1 type
Determines a filtering time for DIO2 when it is used as an
input.
7.5 microseconds.
195 microseconds.
780 microseconds.
4.680 milliseconds.
Selects a drive signal to be connected to digital input/output
DIO2 when parameter 14.14 DIO2 function
For the available selections, see parameter
output source.
Parameters 121
(see page 202).
on page 88).
t t
On Off
delay.
= FIO-11)
is set to Output.
14.11 DIO1
Def/FbEq16
35
-
0.0 s
1
0
1
0
Time
14.05 DIO
10 = 1 s
0.0 s
10 = 1 s
Input
0
1
7.5 us
0
1
2
3
Not
energized