ABB ACS880 Firmware Manual page 13

Term/abbreviation
DDCS
DI
DIO
DO
Drive
DTC
FBA
FEN-01
FEN-11
FEN-21
FEN-31
FIO-01
FIO-11
FCAN-0x
FDCO-0x
FDNA-0x
FECA-01
FENA-11
FLON-0x
FPBA-0x
FSCA-0x
FSO-xx
HTL
ID run
IGBT
Inverter unit
Definition
Distributed drives communication system; a protocol used in
optical fiber communication
Digital input; interface for digital input signals
Digital input/output; interface that can be used as a digital input
or output
Digital output; interface for digital output signals
Frequency converter for controlling AC motors. The drive
consists of a rectifier and an inverter connected together by the
DC link. In drives up to approximately 500 kW, these are
integrated into a single module (drive module). Larger drives
typically consist of separate supply and inverter units.
The ACS880 primary control program is used to control the
inverter part of the drive.
Direct torque control
Fieldbus adapter
Optional TTL encoder interface module
Optional absolute encoder interface module
Optional resolver interface module
Optional HTL encoder interface module
Optional digital I/O extension module
Optional analog I/O extension module
Optional CANopen adapter
Optional DDCS communication module
Optional DeviceNet adapter
Optional EtherCAT® adapter
Optional Ethernet/IP adapter
®
Optional L W
ON ORKS
Optional PROFIBUS DP adapter
Optional Modbus adapter
Optional safety functions module
High-threshold logic
Motor identification run. During the identification run, the drive
will identify the characteristics of the motor for optimum motor
control.
Insulated gate bipolar transistor; a voltage-controlled
semiconductor type widely used in inverters and IGBT supply
units due to their easy controllability and high switching
frequency
In large drives (> 500 kW approx.), the part of the drive that
converts DC to AC for the motor. Consists of one or more
inverter modules and their auxiliary components.
Introduction to the manual 13
adapter