ABB ACS880 Firmware Manual page 178

178 Parameters
No. Name/Value
AI2 scaled
FB A ref1
FB A ref2
DDCS ctrl ref1
DDCS ctrl ref2
D2D or M/F
reference 1
D2D or M/F
reference 2
Motor
potentiometer
PID
Other
26.12 Torque ref2 source
26.13 Torque ref1 function
Ref1
Add (ref1 + ref2)
Sub (ref1 - ref2)
Mul (ref1 × ref2)
Min (ref1, ref2)
Max (ref1, ref2)
26.14 Torque ref1/2
selection
Torque reference 1
Torque reference 2
Follow Ext1/Ext2
selection
DI1
DI2
DI3
DI4
Description
12.22 AI2 scaled value
03.05 FB A reference 1
03.06 FB A reference 2
03.11 DDCS controller ref 1
03.12 DDCS controller ref 2
03.13 M/F or D2D ref1 (see page 93).
03.14 M/F or D2D ref2 (see page 93).
22.80 Motor potentiometer ref act
potentiometer).
40.01 Process PID output actual
controller).
Source selection (see Terms and abbreviations
Selects torque reference source 2.
For the selections, and a diagram of reference source
selection, see parameter
Selects a mathematical function between the reference
sources selected by parameters
and 26.12 Torque ref2 source. See diagram at
ref1 source.
Signal selected by 26.11 Torque ref1 source
reference 1 as such (no function applied).
The sum of the reference sources is used as torque reference
1.
The subtraction ([26.11 Torque ref1
ref2 source]) of the reference sources is used as torque
reference 1.
The multiplication of the reference sources is used as torque
reference 1.
The smaller of the reference sources is used as torque
reference 1.
The greater of the reference sources is used as torque
reference 1.
Configures the selection between torque references 1 and 2.
See diagram at 26.11 Torque ref1
0 = Torque reference 1
1 = Torque reference 2
0.
1.
Torque reference 1 is used when external control location
EXT1 is active. Torque reference 2 is used when external
control location EXT2 is active.
See also parameter 19.11 Ext1/Ext2
Digital input DI1 (10.02 DI delayed
Digital input DI2 (10.02 DI delayed
Digital input DI3 (10.02 DI delayed
Digital input DI4 (10.02 DI delayed
(see page 114).
(see page 92).
(see page 92).
(see page 93).
(see page 93).
(output of the motor
(output of the process PID
26.11 Torque ref1 source.
26.11 Torque ref1 source
26.11 Torque
is used as torque
source] - [26.12 Torque
source.
selection.
status, bit 0).
status, bit 1).
status, bit 2).
status, bit 3).
Def/FbEq16
2
4
5
10
11
12
13
15
16
on page 88). -
Zero
Ref1
0
1
2
3
4
5
Torque
reference 1
0
1
2
3
4
5
6