D2D And Ddcs Transmit Data - ABB ACS880 Firmware Manual

272 Parameters
No. Name/Value
Velocity
DC voltage
Active power
Reactive power
60.63 DDCS controller
act2 type
Auto
Transparent
General
Torque
Speed
Frequency
Position
Velocity
DC voltage
Active power
Reactive power
60.64 Mailbox dataset
selection
Dataset 32/33
Dataset 24/25
61
61 D2D and DDCS
transmit data
61.01 M/F data 1
selection
None
CW 16bit
SW 16bit
Act1 16bit
Act2 16bit
Other
Description
Reserved.
Reserved.
The scaling is defined by parameter
The scaling is defined by parameter
Selects the type and scaling of actual value 2 transmitted to
the external controller. The scaling of the value is defined by
parameters 46.01...46.04, depending on which actual value
type is selected by this parameter.
Type and scaling is chosen automatically according to the
currently active operation mode as follows:
Operation mode
(see par. 19.01)
Speed control
Torque control
Frequency control
No scaling is applied.
Generic reference without a specific unit.
The scaling is defined by parameter
The scaling is defined by parameter
The scaling is defined by parameter
Reserved.
Reserved.
Reserved.
The scaling is defined by parameter
The scaling is defined by parameter
Selects the pair of data sets used by the mailbox service in
the drive/controller communication.
See section External controller interface
Data sets 32 and 33.
Data sets 24 and 25.
Defines the data sent to the DDCS link.
See also parameter group
Preselects the data to be sent as word 1 onto the
master/follower link.
See also parameter 61.25 M/F data 1
None.
Control Word (16 bits)
Status Word (16 bits)
Actual value ACT1 (16 bits)
Actual value ACT2 (16 bits)
Source selection (see Terms and abbreviations
46.04 Power scaling.
46.04 Power scaling.
Actual value 2 type
Torque
Torque
Torque
46.03 Torque
46.01 Speed scaling.
46.02 Frequency
46.04 Power scaling.
46.04 Power scaling.
(page 34).
60 DDCS communication.
value.
on page 88).
Def/FbEq16
7
8
9
10
Auto
0
1
2
scaling. 3
4
scaling. 5
6
7
8
9
10
Dataset
32/33
0
1
None
0
1
4
5
6
-