ABB ACS880 Firmware Manual page 361

Code
Warning
(hex)
A88C Device clean
A88D DC capacitor
A88E Cabinet fan
A88F Cooling fan
A890 Additional cooling
A8A0 AI supervision
Programmable warning:
12.03 AI supervision
function
A8B0 Signal supervision
(Editable message text)
Programmable warning:
32.06 Supervision 1 action
32.16 Supervision 2 action
32.26 Supervision 3 action
A981 External warning 1
(Editable message text)
Programmable warning:
31.01 External event 1
source
31.02 External event 1
type
A982 External warning 2
(Editable message text)
Programmable warning:
31.03 External event 2
source
31.04 External event 2
type
A983 External warning 3
(Editable message text)
Programmable warning:
31.05 External event 3
source
31.06 External event 3
type
A984 External warning 4
(Editable message text)
Programmable warning:
31.07 External event 4
source
31.08 External event 4
type
A985 External warning 5
(Editable message text)
Programmable warning:
31.09 External event 5
source
31.10 External event 5
type
AF8C Process PID sleep
mode
AFAA Autoreset
Cause
Warning generated by an on-
time timer.
Programmable warnings:
33.14 On-time 1 warn message
33.24 On-time 2 warn message
An analog signal is outside the
limits specified for the analog
input.
Warning generated by a signal
supervision function.
Fault in external device 1.
Fault in external device 2.
Fault in external device 3.
Fault in external device 4.
Fault in external device 5.
The drive is entering sleep
mode.
A fault is about to be autoreset. Informative warning. See the settings in
Fault tracing 361
What to do
Check the event log for an auxiliary code.
Check the source of the warning
corresponding to the code:
0: 33.13 On-time 1 source
1: 33.23 On-time 2 source
10: 05.04 Fan on-time counter.
Check signal level at the analog input.
Check the wiring connected to the input.
Check the minimum and maximum limits
of the input in parameter group
Standard AI.
Check the source of the warning
(parameter 32.07, 32.17
Check the external device.
Check setting of parameter
External event 1 source.
Check the external device.
Check setting of parameter
External event 2 source.
Check the external device.
Check setting of parameter
External event 3 source.
Check the external device.
Check setting of parameter
External event 4 source.
Check the external device.
Check setting of parameter
External event 5 source.
Informative warning. See section
function for process PID control
51), and parameters 40.41...40.48.
parameter group 31 Fault
12
or 32.28).
31.01
31.03
31.05
31.07
31.09
Sleep
(page
functions.