ABB ACS880 Firmware Manual page 273

No. Name/Value
61.02 M/F data 2
selection
61.03 M/F data 3
selection
61.25 M/F data 1 value
0...65535
61.26 M/F data 2 value
0...65535
61.27 M/F data 3 value
0...65535
61.51 Data set 11 data 1
selection
None
CW 16bit
SW 16bit
Act1 16bit
Act2 16bit
Other
61.52 Data set 11 data 2
selection
Description
Preselects the data to be sent as word 2 onto the
master/follower link.
See also parameter 61.26 M/F data 2
For the selections, see parameter
Preselects the data to be sent as word 3 onto the
master/follower link.
See also parameter 61.27 M/F data 3
For the selections, see parameter
Displays the data to be sent onto the master/follower link as
word 1 as an integer.
If no data has been preselected by
selection, the value to be sent can be written directly into this
parameter.
Data to be sent as word 1 in master/follower communication.
Displays the data to be sent onto the master/follower link as
word 2 as an integer.
If no data has been preselected by
selection, the value to be sent can be written directly into this
parameter.
Data to be sent as word 2 in master/follower communication.
Displays the data to be sent onto the master/follower link as
word 3 as an integer.
If no data has been preselected by
selection, the value to be sent can be written directly into this
parameter.
Data to be sent as word 3 in master/follower communication.
Parameters 61.51...61.74
sets 11, 13, 15, 17, 19, 21, 23 and 25 to the external
controller.
Parameters 61.101...61.124
external controller. If no data has been preselected, the value
to be sent can be written directly into these parameters.
For example, this parameter preselects the data for word 1 of
data set 11. Parameter 61.101 Data set 11 data 1 value
displays the selected data in integer format. If no data is
preselected, the value to be sent can be written directly into
parameter 61.101.
None.
Control Word (16 bits)
Status Word (16 bits)
Actual value ACT1 (16 bits)
Actual value ACT2 (16 bits)
Source selection (see Terms and abbreviations
Preselects the data to be sent as word 2 of data set 11 to the
external controller.
See also parameter 61.102 Data set 11 data 2
For the selections, see parameter
selection.
value.
61.01 M/F data 1
value.
61.01 M/F data 1
61.01 M/F data 1
61.02 M/F data 2
61.03 M/F data 3
preselect data to be sent in data
display the data to be sent to the
on page 88).
value.
61.51 Data set 11 data 1
Parameters 273
Def/FbEq16
None
selection.
None
selection.
0
0
0
None
0
1
4
5
6
-
None