ABB ACS880 Firmware Manual page 255

No. Name/Value
Torque
Speed
Frequency
Position
Velocity
DC voltage
Active power
Reactive power
50.06 FBA A SW sel
Auto
Transparent mode
50.07 FBA A actual 1 type
Auto
Transparent
General
Torque
Speed
Frequency
Position
Velocity
DC voltage
Active power
Reactive power
Description
The scaling is defined by parameter
The scaling is defined by parameter
The scaling is defined by parameter
Reserved.
Reserved.
Reserved.
The scaling is defined by parameter
The scaling is defined by parameter
Selects the source of the Status word to be sent to the
fieldbus network through fieldbus adapter A.
Source of the Status word is chosen automatically.
The source selected by parameter
transparent source is transmitted as the Status word to the
fieldbus network through fieldbus adapter A.
Selects the type and scaling of actual value 1 transmitted to
the fieldbus network through fieldbus adapter A. The scaling
of the value is defined by parameters 46.01...46.04,
depending on which actual value type is selected by this
parameter.
Type and scaling is chosen automatically according to the
currently active operation mode as follows:
Operation mode
(see par. 19.01)
Speed control
Torque control
Frequency control
No scaling is applied.
Generic reference without a specific unit.
The scaling is defined by parameter
The scaling is defined by parameter
The scaling is defined by parameter
Reserved.
Reserved.
Reserved.
The scaling is defined by parameter
The scaling is defined by parameter
Parameters 255
46.03 Torque scaling.
46.01 Speed scaling.
46.02 Frequency scaling. 5
46.04 Power scaling.
46.04 Power scaling.
50.09 FBA A SW
Actual value 1 type
Speed
Speed
Frequency
46.03 Torque scaling.
46.01 Speed scaling.
46.02 Frequency scaling. 5
46.04 Power scaling.
46.04 Power scaling.
Def/FbEq16
3
4
6
7
8
9
10
Auto
0
1
Auto
0
1
2
3
4
6
7
8
9
10