ABB ACS880 Firmware Manual page 248

248 Parameters
No. Name/Value
46.02 Frequency scaling
0.10 ... 1000.00 Hz
46.03 Torque scaling
0.1 ... 1000.0%
46.04 Power scaling
0.1 ... 30000.0 kW
or
0.1 ... 40214.5 hp
46.11 Filter time motor
speed
2...20000 ms
46.12 Filter time output
frequency
2...20000 ms
46.13 Filter time motor
torque
2...20000 ms
46.14 Filter time power
out
2...20000 ms
Description
Defines the maximum frequency value used to define the
acceleration ramp rate and the initial frequency value used to
define deceleration ramp rate (see parameter group
Frequency reference chain). The frequency acceleration and
deceleration ramp times are therefore related to this value
(not to parameter 30.14 Maximum
Also defines the 16-bit scaling of frequency-related
parameters. The value of this parameter corresponds to
20000 in fieldbus, master/follower etc. communication.
Acceleration/deceleration terminal/initial frequency.
Defines the 16-bit scaling of torque parameters. The value of
this parameter (in percent of nominal motor torque)
corresponds to 10000 in fieldbus, master/follower etc.
communication.
Torque corresponding to 10000 on fieldbus.
Defines the output power value that corresponds to 10000 in
fieldbus, master/follower etc. communication. The unit is
selected by parameter 96.16 Unit
Power corresponding to 10000 on fieldbus.
Defines a filter time for signals
01.02 Motor speed estimated,
and 01.05 Encoder 2 speed
Motor speed signal filter time.
Defines a filter time for signal
Output frequency signal filter time.
Defines a filter time for signal
Motor torque signal filter time.
Defines a filter time for signal
Output power signal filter time.
frequency).
selection.
01.01 Motor speed used,
01.04 Encoder 1 speed filtered
filtered.
01.06 Output frequency.
01.10 Motor torque %.
01.14 Output power..
Def/FbEq16
50.00 Hz
28
10 = 1 Hz
100.0%
10 = 1%
1000.0 kW or
hp
1 = 1 unit
500 ms
1 = 1 ms
500 ms
1 = 1 ms
100 ms
1 = 1 ms
100 ms
1 = 1 ms