Table of Contents
Advertisement
A-D CONVERTERS
11
11.2 A-D Converter Related Registers
(6) ADnSSTT (A-Dn conversion start) bit (D7)
When this bit is set to 1 while a software trigger has been selected by the ADnSSEL (A-Dn
conversion start trigger selection) bit, the A-Dn converter starts A-D conversion.
If the A-Dn conversion start bit and A-Dn conversion stop bit are set to 1 at the same time, the A-
Dn conversion stop bit has priority.
If this bit is set to 1 again during single mode conversion, special operation mode "Forcible single
mode execution during scan mode" is entered into, so that the channel being converted in scan
mode is canceled and single mode conversion is performed. When the single mode conversion
finishes, scan mode A-D conversion is restarted beginning with the canceled channel.
11-22
Ver.0.10
Advertisement
Table of Contents
