Mitsubishi Electric M32R Series User Manual page 310

10
The table below shows the relationship between the interrupt signals generated by multijunction
timers and the interrupt sources input to the interrupt controller.
Table 10.2.6 Interrupt Signals Generated by MJT
Signal Name Source of Interrupt Generated
IRQ0 TIO0, TIO1, TIO2, TIO3
IRQ1 TOP6, TOP7
IRQ2 TOP0, TOP1, TOP2, TOP3, TOP4, TOP5
IRQ3 TIO8, TIO9
IRQ4 TIO4, TIO5, TIO6, TIO7
IRQ6 TOP8, TOP9
IRQ7 TMS0, TMS1
IRQ8 TIN7, TIN8, TIN9, TIN10, TIN11
IRQ9 TIN0, TIN1, TIN2
IRQ10 TIN12, TIN13, TIN14, TIN15, TIN16,
TIN17, TIN18, TIN19
IRQ11 TIN20, TIN21, TIN22, TIN23
IRQ12 TIN3, TIN4, TIN5, TIN6
IRQ13 TOD0_0, TOD0_1, TOD0_2, TOD0_3,
TOD0_4, TOD0_5, TOD0_6, TOD0_7
IRQ16 TOD1_0, TOD1_1, TOD1_2, TOD1_3,
TOD1_4, TOD1_5, TOD1_6, TOD1_7,
TOM0_0, TOM0_1, TOM0_2, TOM0_3,
TOM0_4, TOM0_5, TOM0_6, TOM0_7
IRQ18 TIN30, TIN31, TIN32, TIN33
Note 1: Refer to Chapter 5, "Interrupt Controller (ICU)."
Note 2: For TOP10 and TID0-2, there are no interrupt status and mask bits in MJT interrupt control registers
because they only have one source of interrupt in the group. (They are controlled directly by the
interrupt controller.)
10.2 Common Units of Multijunction Timer
Interrupt Sources Input to ICU
MJT output interrupt 0
MJT output interrupt 1
MJT output interrupt 2
MJT output interrupt 3
MJT output interrupt 4
MJT output interrupt 6
MJT output interrupt 7
MJT input interrupt 0
MJT input interrupt 1
MJT input interrupt 2
MJT input interrupt 3
MJT input interrupt 4
TOD0 output interrupt
TOD1 + TOM0 output interrupt
TML1 input interrupt
10-40
MULTIJUNCTION TIMERS
Number of Input Sources
(Note 1)
4
2
6
2
4
2
2
5
3
8
4
4
8
16
4
Ver.0.10