Tom Reload 1 Registers - Mitsubishi Electric M32R Series User Manual

10

10.9.7 TOM Reload 1 Registers

TOM0_0 Reload 1 Register (TOM00RL1)
TOM0_1 Reload 1 Register (TOM01RL1)
TOM0_2 Reload 1 Register (TOM02RL1)
TOM0_3 Reload 1 Register (TOM03RL1)
TOM0_4 Reload 1 Register (TOM04RL1)
TOM0_5 Reload 1 Register (TOM05RL1)
TOM0_6 Reload 1 Register (TOM06RL1)
TOM0_7 Reload 1 Register (TOM07RL1)
D0 1 2
D Bit Name
0-15 TOM00RL1-TOM07RL1
Note: This register must always be accessed in halfwords.
The TOM0 Reload 1 Registers are used to reload the TOM0 Counter Registers (TOM00CT-
TOM07CT) with data. It is in the following cases that the content of reload 1 register is loaded into
the counter:
• When the count value set by reload 1 register underflowed in PWM output mode.
Writing data to the reload 1 register does not mean that the data is loaded into the counter
simultaneously.
3 4 5 6
TOM00RL1-TOM07RL1
10-212
MULTIJUNCTION TIMERS
10.9 TOM (Output-related 16-bit Timer)
7 8 9 10 11
Function
16-bit reload register value
<Address: H'0080 0C94>
<Address: H'0080 0C9C>
<Address: H'0080 0CA4>
<Address: H'0080 0CAC>
<Address: H'0080 0CB4>
<Address: H'0080 0CBC>
<Address: H'0080 0CC4>
<Address: H'0080 0CCC>
12 13 14 D15
<When reset: Indeterminate>
R
Ver.0.10
W