Download Print this page

Mitsubishi Electric VC-X3000 User Manual

Display wall processor.
Hide thumbs
   

Advertisement

DISPLAY WALL PROCESSOR
MODEL
VC-X3000
User's Manual
Warning:
This user's manual is important to you.
Please read it before using your product.
For MITSUBISHI dealer
Please read Set-up and Installation Manual before installing the product.
Be sure to follow the directions below.
This product requires special installation to prevent hazard.
Please ask installation specialists for installation.
Don't attempt to install the product by yourself.
EN-1

Advertisement

   Related Manuals for Mitsubishi Electric VC-X3000

   Summary of Contents for Mitsubishi Electric VC-X3000

  • Page 1

    DISPLAY WALL PROCESSOR MODEL VC-X3000 User’s Manual Be sure to follow the directions below. Warning: This product requires special installation to prevent hazard. Please ask installation specialists for installation. Don’t attempt to install the product by yourself. This user’s manual is important to you.

  • Page 2

    CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”...

  • Page 3: Important Safeguards

    Important safeguards Please read all these instructions regarding your 10. Power sources display wall processor and retain them for future This product should be operated only from reference. Follow all warnings and instructions the type of power source indicated on the marked on the display wall processor.

  • Page 4

    Information for users and Annex IV. from the wall to prevent blocking the intake, exhaust slots and ventilation of this Your MITSUBISHI ELECTRIC product is designed product because hot air comes out of it. and manufactured with high quality materials and components which can be recycled and reused.

  • Page 5

    Specifications / Items sold separately • VC-X3000 ® ® Processor LV 1.66GHz × 2 Processor Dual-Core Intel Xeon ® Chip set Intel E7520 + E6300ESB 1 GB (PC2-4200 512 MB Registered ECC DIMM × 2) System memory Expandable up to 3 GB ×...

  • Page 6

    Hard Disk Replacement CAUTION: Firmly insert the new hard disk along the rails. The replacement of hard disc should be performed while the power is on. If the hard disc is replaced when the power is off, the system will not be started. Required tools: Hexagonal wrench (2.5 mm) Remove the two front panel screws and...

  • Page 7

    Rack mounting installation You can install this system into standard 19-inch rack, with attached “rack mounting bracket”. This should be done by installation specialists. To secure the rack, refer to the rack instructions from its manufacturer. One method for securing the rack is to bolt it to the floor or wall.

  • Page 8: Troubleshooting

    HDD error LED • Replace the faulty HDD. lights up. Temperature error • Check that the inlet port or outlet port of the VC-X3000 is not blocked LED lights up. with a cable or other article. Can’t control the • Check that the LAN cable is connected properly.

  • Page 9: Contact Information

    Contact Information North America MEU-SWE (Mitsubishi Electric Europe B.V. INDONESIA (Mitsubishi Electric Asia Pte. Ltd.) Scandinavian Branch) 307, Alexandra Road, #05-01/02 Mitsubishi MESCA (Mitsubishi Electric Sales Canada Inc.) Hammarbacken 14, Box 750 S-19127, Electric Building, Singapore 159943 4299 14th Avenue Markham, Ontario L3R 0J2,...

Comments to this Manuals

Symbols: 0
Latest comments: