Tid Control &Prescaler Enable Registers - Mitsubishi Electric M32R Series User Manual

10
10.7.3 TID Control &Prescaler Enable Registers
TID0 Control &Prescaler 3 Enable Register (TID0PRS3EN) <Address: H'0080 07D1>
D8
D Bit Name
8 No functions assigned
9, 10 TID0M
(TID0 operation mode selection)
11 TID0CEN
(TID0 count enable)
12 - 14 No functions assigned
15 PRS3EN
(Prescaler 3 enable)
Note: Always make sure the counter has stopped and is idle before setting or changing operation modes.
The TID0 Control & Prescaler 3 Enable Register selects TID0 operation mode (Fixed period count
mode, Event count mode, or Multiply-by-4 event count mode) and controls prescaler 3 startup.
9 10 11
TID0M TID0CEN
Function
0X : Fixed period count mode
10 : Multiply-by-4 event count mode
11 : Event count mode
0 : Count stops
1 : Count starts
0 : Count stops
1 : Count starts
10-163
MULTIJUNCTION TIMERS
10.7 TID (Input-related 16-bit Timer)
12 13 14 D15
PRS3EN
<When reset : H'00>
R W
0 —
0 —
Ver.0.10