Exhaust Installation - Polaris GENERAL 2016 Service Manual

ENGINE / COOLING SYSTEM

EXHAUST INSTALLATION

1. Install the exhaust assembly in the RH side of the
vehicle.
2. Install the fasteners holding the headpipe assembly
to the engine. Torque fasteners to specification.
TORQUE
Exhaust Headpipe Fasteners:
18 lb-ft (24 Nm)
3. Connect the oxygen sensor to the wiring harness.
4. If necessary, install the fasteners holding the
headpipe to silencer.
specification.
TORQUE
Exhaust Headpipe to Silencer Fasteners:
21 lb-lb (28 Nm)
3.88
Torque fasteners to
5. Install the spring holding the silencer to the vehicle.
6. Lower the cargo box and secure in position.
9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual
© Copyright Polaris Industries Inc.